Mito Red Light MitoPRO 1500X
Full-body six-wavelength panel with a published LightLab report, a red-only mode with no blue LEDs, a 60-day trial and a 3-year warranty.
Specs
| Type | Panel (full body) |
|---|---|
| Wavelengths | 590 nm amber; 630, 660 nm red; 810, 830, 850 nm NIR |
| Irradiance (source) | 68 mW/cm² at 6 in (independent) |
| Treatment area | Panel 10 × 43 in |
| Session | 10 min per area at 12-18 in |
| FDA status | Class II listed, 510(k)-exempt, not cleared |
| LEDs | 300 dual-chip (600 chips) |
| Lab test | 53.5 avg, 72.5 peak mW/cm² at 6 in (LightLab, Sept 2025) |
| Irradiance note | Alex Fergus spectrometer, 9-point average at 6 in |
| Power draw | 445 W |
| Weight | 25 lb |
| Warranty | 3 years |
| Trial | 60 days |
Specs from the manufacturer and the sources listed below. Last verified Oct 20, 2026.
Good
- Published LightLab report (53.5 average, 72.5 peak mW/cm² at 6 in) plus an independent 68 mW/cm² reading from Alex Fergus
- Mode 2 runs 590 to 660 nm only, and the panel has no blue LEDs, which suits evening sessions
- 60-day money-back trial and 3-year warranty
- Flicker-free drivers, touchscreen and app; NIR-only mode is capped at 5 minutes on the panel
Not so good
- Same $1,299 as the PlatinumLED BioMax 900 but narrower (10 vs 11.8 in) with lower measured output (68 vs 90 mW/cm²)
- The product page's solar-meter figure of over 160 mW/cm² overstates output; use the lab number
- Not FDA cleared for any use
- Far more panel than a face-only routine needs
The MitoPRO 1500X is a well-documented full-body panel. Mito publishes a LightLab International report for it: 53.5 mW/cm² average and 72.5 peak at 6 inches, tested in September 2025. Alex Fergus’s own spectrometer average was 68. The two methods differ, but both sit far below the solar-meter figure, and few panel brands publish a lab report at all.
The same product page also lists “over 160 mW/cm²” from a consumer solar meter. Mito labels it as for comparison only. Ignore it and compare panels on spectrometer readings at the same distance.
On output per dollar it trails the PlatinumLED BioMax 900, which costs the same and measured 90 mW/cm² in the same comparison. Mito’s case rests on other things: a 60-day trial, a 3-year warranty, flicker-free drivers and an app.
The modes matter for timing. Mode 2 runs only the 590 nm amber and 630 to 660 nm red chips, and the panel has no blue LEDs at all. That makes it one of the better panels for an evening session, when you want to keep short-wavelength light low. Near-infrared-only mode is capped at 5 minutes on the panel because the light is invisible.
Mito sells the same design in smaller sizes, from the 300X at $449. For the face, though, an FDA-cleared mask such as the Omnilux Contour Face is the better tool, and no panel here has evidence for sleep worth buying for.
Sources
- Mito Red Light MitoPRO X Series product page (sizes, wavelengths, modes, warranty, trial)
- Mito Red Light third-party testing page (LightLab report LLIA002765-006 for MitoPRO 1500X)
- Alex Fergus, Light Therapy Insiders red light panel comparison (spectrometer readings at 6 in)
- FDA registration and listing record for Mito Red Light panels (openFDA)
- FDA product classification ILY, infrared therapeutic heating lamp, 510(k) exempt
Head to head
Alternatives
- Best maskOmnilux Contour Face$395
- Best panelPlatinumLED BioMax 900$1,299
- Best mask for acneShark CryoGlow LED Face Mask$350
- CurrentBody Skin LED Light Therapy Mask Series 2$470